2340 NW 102nd Pl Doral, FL
305-537-6271
Mon. - Fri. 09:00 am - 05:30 pm

Dimatix Samba G3L Printhead

$5,279.46

Dimatix Samba G3L Printhead

5279 in stock

Description

Dimatix Samba G3L Printhead

Dimatix Samba G3L Printhead The Samba G3L printhead technology delivers the breakthrough quality, speed and scalability required for variable width, single pass production inkjet printing and materials deposition applications. Based on state-of-the-art silicon micro-electro-mechanical systems manufacturing (Si-MEMS), the Samba G3L printhead is the most advanced technology available today.With 2048 individually addressable nozzles, the Samba G3L printhead has 1,200 dpi native resolution (600 dpi in redundant mode) and a native ink drop size of 2.4 picoliters (pl) delivering outstanding print quality that can jet a wide range of fluids including UV curable and aqueous inks.Specifications

Number of addressable Jets per module: 2048
Print width: 43mm (1.7 in.) per printhead, stitch for infinite print width
Native resolution: 1200 dpi/600 dpi in redundant mode
Native drop size/largest drop size: 2.4pl to 13.2pl
Firing frequency: Up to 100Khz
Nominal fluid viscosity: 2 to 10 cPs (3 to 7 cPs recommended)
Compatible jetting fluids: UV-curable, organic solvents, aqueous, latex
Nozzle Plate technology: Silicon MEMS/ Non-wetting coating
Printhead heat type: Fluids thermal transfer
Dimatix Samba G3L Printhead is compatible for the following models:
Durst
Tau 330 RSC | Samba PS4300
Printko provides a wide variety of orginal parts for Durst. See all Durst Spare Parts  and Printheads , products at Our Durst section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Durst  equipment. We invite you to consult through Our Manufacturers Network.

Additional information

Weight 1 lbs
Dimensions 6 × 6 × 3 in

Reviews

There are no reviews yet.

Be the first to review “Dimatix Samba G3L Printhead”

Your email address will not be published.

Vendor Information

  • Address:
  • No ratings found yet!

Quick Comparison

SettingsDimatix Samba G3L Printhead removeMutoh-Blizzard Bearing X-axis-DF-43417 removeRoland-RS-540 LM Guide 2050L (Rail Only) removeAgfa-Anapurna M2050 Bearing(UFLO05)-D2-7310401-0005 removeRoland-R-BEARING-6203RS-21885137 removeRoland-FJ-600 L-Bearing SSR15XW2U-2260LYF-11899136AS remove
ImageDimatix Samba G3L PrintheadDimatix Samba G3L PrintheadDimatix Samba G3L PrintheadDimatix Samba G3L PrintheadDimatix Samba G3L PrintheadDimatix Samba G3L Printhead
SKUDF-434171000004745D2+7310401-00052188513711899136AS
Rating
Price$5,279.46$24.61$1,880.65$389.92$32.92$2,748.55
Stock

5279 in stock

Availability5279 in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionDimatix Samba G3L PrintheadShips Within 5-7 DaysShips Within 5-7 DaysShips Within 5-7 DaysShips Within 5-7 DaysShips Within 5-7 Days
Content

Dimatix Samba G3L Printhead

Dimatix Samba G3L Printhead The Samba G3L printhead technology delivers the breakthrough quality, speed and scalability required for variable width, single pass production inkjet printing and materials deposition applications. Based on state-of-the-art silicon micro-electro-mechanical systems manufacturing (Si-MEMS), the Samba G3L printhead is the most advanced technology available today.With 2048 individually addressable nozzles, the Samba G3L printhead has 1,200 dpi native resolution (600 dpi in redundant mode) and a native ink drop size of 2.4 picoliters (pl) delivering outstanding print quality that can jet a wide range of fluids including UV curable and aqueous inks.Specifications Number of addressable Jets per module: 2048 Print width: 43mm (1.7 in.) per printhead, stitch for infinite print width Native resolution: 1200 dpi/600 dpi in redundant mode Native drop size/largest drop size: 2.4pl to 13.2pl Firing frequency: Up to 100Khz Nominal fluid viscosity: 2 to 10 cPs (3 to 7 cPs recommended) Compatible jetting fluids: UV-curable, organic solvents, aqueous, latex Nozzle Plate technology: Silicon MEMS/ Non-wetting coating Printhead heat type: Fluids thermal transfer Dimatix Samba G3L Printhead is compatible for the following models: Durst Tau 330 RSC | Samba PS4300 Printko provides a wide variety of orginal parts for Durst. See all Durst Spare Parts  and Printheads , products at Our Durst section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Durst  equipment. We invite you to consult through Our Manufacturers Network.

Mutoh-Blizzard Bearing X-axis-DF-43417

Mutoh-Blizzard Bearing X-axis-DF-43417 Blizzard Bearing X-axis - DF-43417 Bearing X-axis is suitable for Mutoh Blizzard printers. This is the original Mutoh part (number DF-43417). Mutoh-Blizzard Bearing X-axis-DF-43417 is compatible for the following models: Mutoh Blizzard 65 | Rockhopper 3 65 | Rockhopper 3 90 | Rockhopper 3 Extreme 65 | Rockhopper 3 Extreme 90 | Rockhopper II 50 | Rockhopper II 64 | Rockhopper II 87 | Rockhopper II-2H | Rockhopper II-4H | Spitfire 100 Extreme | Blizzard 90 | Spitfire 65 | Spitfire 90 | Viper 100 | Viper 100 TX Extreme | Viper 65 | Viper 90 | Viper Extreme 65 | Viper Extreme 90 | Viper TX 65 | Viper TX 90 | PJ-1624NX (Toucan 64 4c) | Viper TX Extreme 65 | Viper TX Extreme 90 | PJ-1626FE (Toucan Hybrid) | PJ-1626NX (Toucan 64 6c) | PJ-2216NX (Toucan 87) | RJ-8000-50 (Falcon II) | RJ-8000-64 (Falcon II) | RJ-8000-87 (Falcon II) Printko provides a wide variety of orginal parts for Mutoh. See all Mutoh Spare Parts  and Printheads , products at Our Mutoh section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Mutoh  equipment. We invite you to consult through Our Manufacturers Network.

Roland-RS-540 LM Guide 2050L (Rail Only)

Roland-RS-540 LM Guide 2050L (Rail Only) RS-540 LM Guide 2050L (Rail Only) LM Guide 2050L is suitable for Roland RS-540 printers. This is the original Roland part (number 1000004745). This LM Guide is 2050mm long. Roland-RS-540 LM Guide 2050L (Rail Only) is compatible for the following models: Roland RS-540 Printko provides a wide variety of orginal parts for Roland. See all Roland Spare Parts  and Printheads , products at Our Roland section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Roland  equipment. We invite you to consult through Our Manufacturers Network.

Agfa-Anapurna M2050 Bearing(UFLO05)-D2-7310401-0005

Agfa-Anapurna M2050 Bearing(UFLO05)-D2-7310401-0005 Anapurna M2050 Bearing(UFLO05) - D2+7310401-0005 Bearing(UFLO05) is suitable for Agfa :Anapurna M2050 printers. This is the original Agfa part (number D2+7310401-0005). Agfa-Anapurna M2050 Bearing(UFLO05)-D2-7310401-0005 is compatible for the following models: Agfa Anapurna M2050 Printko provides a wide variety of orginal parts for Agfa. See all Agfa Spare Parts  and Printheads , products at Our Agfa section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Agfa  equipment. We invite you to consult through Our Manufacturers Network.

Roland-R-BEARING-6203RS-21885137

Roland-R-BEARING-6203RS-21885137 Roland R-BEARING,6203RS - 21885137 R-BEARING,6203RS is suitable for Roland printers. This is the original Roland part (number 21885137). Roland-R-BEARING-6203RS-21885137 is compatible for the following models: Roland Printko provides a wide variety of orginal parts for Roland. See all Roland Spare Parts  and Printheads , products at Our Roland section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Roland  equipment. We invite you to consult through Our Manufacturers Network.

Roland-FJ-600 L-Bearing SSR15XW2U-2260LYF-11899136AS

Roland-FJ-600 L-Bearing SSR15XW2U-2260LYF-11899136AS FJ-600 L-Bearing SSR15XW2U+2260LYF - 11899136AS L-Bearing SSR15XW2U+2260LYF is suitable for Roland FJ-600 printers. This is the original Roland part (number 11899136AS). This L-Bearing is 2260mm long. Roland-FJ-600 L-Bearing SSR15XW2U-2260LYF-11899136AS is compatible for the following models: Roland FJ-600 Printko provides a wide variety of orginal parts for Roland. See all Roland Spare Parts  and Printheads , products at Our Roland section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Roland  equipment. We invite you to consult through Our Manufacturers Network.
Weight111111
Dimensions6 × 6 × 3 in6 × 6 × 3 in6 × 6 × 3 in6 × 6 × 3 in6 × 6 × 3 in6 × 6 × 3 in
Additional information
Weight 1 lbs
Dimensions 6 × 6 × 3 in
Weight 1 lbs
Dimensions 6 × 6 × 3 in
Weight 1 lbs
Dimensions 6 × 6 × 3 in
Weight 1 lbs
Dimensions 6 × 6 × 3 in
Weight 1 lbs
Dimensions 6 × 6 × 3 in
Weight 1 lbs
Dimensions 6 × 6 × 3 in
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
X